The future of sustainable mobility requires the development of optimal and highly efficient energy sources. That’s exactly what you did e-mersive after the introduction of battery immersion cooling technology, which has a number of features that improve battery performance.
The company describes its system in three main steps: Regenerative braking, acceleration and continuity, which are applied to provide great benefits to different battery packs, whether small, medium or large. E-MERSIV technology can operate at voltages up to 1000 volts with cylindrical lithium-ion cells or immersed in dielectric fluid.
The modules can be adapted to any type of vehicle, regardless of its shape. In addition, the company’s immersion cooling system offers advanced algorithms to improve security and therefore performance, as well as data logging and transmission for detailed control.
avoid lithium plating it was another one of vbenefits offered by E-MERSIV. In the same way, a secondary double circuit with a pump and a plate heat exchanger can be additionally integrated inside the modules.
Thus, thanks to these characteristics, the developed product offersexcellent balance of performance and safety which not only has a positive effect on efficiency, but also allows you to get an ultra-fast charge in 10 minutes and a longer service life without the spread of thermal leaks.
| physical characteristics | Value |
| Energy available in 1c | 5.2 kWh |
| Rated voltage | 65 V (NMC 18s) |
| Rated power | 80 Ah |
| continuous/peak current | 560/800A |
| Continuous power / (peak 10 s) unload | 25/36 kW (7C/10C) |
| Continuous power/(10s peak) under load | 5.4/36 kW (1.5C/10C) |
| Gravimetric energy density (dry) | 148 Wh/kg |
| Bulk energy density | 192 Wh/l |
| Refrigeration / dielectric coolant | <60°С |
| Communication | can bus |
| Dimensions | Value |
| Height | 100 mm |
| Wide | 630 mm |
| Depth | 430 mm |
| Volume | 27.1 l |
| dry weight) | 35 kg |
| Weight (wet) | 39 kg |
| physical characteristics | Value |
| Energy available in 1c | 52 kWh |
| Rated voltage | 648B |
| Peak Discharge Power | 360 kW |
| regenerative braking power | 360 kW |
| charging power | 54 kW |
| Refrigerant circuit weight (wet) | 50 kg |
| Total battery weight (including wet cooling circuit and flat floor chassis) | 430 kg |
E-MERSIV modules they also provide optimal temperatures and uniformity between cells to improve battery performance and capacity, increase battery life up to 30% with a high level of safety without heat leakage, as evidenced by the simultaneous release of heat from two neighboring cells.
About E-MERSIV
E-MERSIV is a fast growing French company.which aims to respond to current environmental challenges and promote mobility in a low-carbon economy. With high-performance submersible battery packs, E-MERSIV’s mission is to accelerate the democratization of electric vehicles.
Actually, thanks to an innovative solutiongreatly enhancing usability and providing ultra-fast charging in less than 10 minutes in most cases, E-MERSIV removes the barriers to buying an electric vehicle.
Finally, by offering vehicle manufacturers a system that promotes the energy efficiency required for large-scale adoption of electric modes of transport, the company aims to meet the new needs of manufacturers.
keep reading
. Why is your phone’s battery draining less and less?
. How to properly jumper a car battery
. They will create high-performance batteries using aluminum and fiberglass.
. Important elements of an electric vehicle battery according to Porsche
Source: La Opinion
Ray Bly is an accomplished journalist in the field of Automobile. He currently works as a writer at 24 news breaker. With a deep understanding of the Automotive industry and a talent for uncovering the latest developments, Ray’s writing provides readers with insightful and informative coverage of the latest news and trends in the field.